ULBREC

product_pic/vale/fuji/fuji001.jpgproduct_pic/vale/fuji/fuji002.jpgproduct_pic/vale/fuji/fuji003.jpg

Strainer เป็นอุปกรณ์สำหรับกรองของแข็ง, ของเหลว และ gas ในกระบวนการผลิต เหมาะสำหรับกลุ่มอุตสาหกรรมหลากหลายประเภท เช่น อุตสาหกรรมเคมี, อาหาร, เครื่องดื่ม, ปิโตรเคมี และเหมืองแร่ โดยมีรุ่นให้เลือกหลากหลายประเภททั้งแบบ Cone type temporary strainer, Simplex/Duplex basket strainers, Automatic backwashing strainers, Fabricated "Y" OR "T" type strainers, Manual & Auto backwashing filters etc. ผลิตแบบ Cast body และ Fabricated  วัสดุมีให้เลือกตั้งแต่  ทองเหลือง, เหล็กหล่อ, สเตนเลส หรือ อื่นๆ      มีขนาด 1"-18" และขนาด Mesh ตั้งแต่ #2 - #400  ซึ่ง Strainer ที่ถูก Fabricated ตาม Order สามารถออกแบบตามมาตราฐานของประเทศออสเตรเลียและมาตราฐาน ASME พร้อมมีCertificate รองรับ

The Ulbrich company is product from Australia, produces a range of filtration and other process equipment including: Filters, Mixers,agitators,ete.

The majority of the above equipment are proprietary products designed by Ulbrich over a period of forty years. Initially they were designed and manufactured to supply the petroleum and petrochemical industries. Over time the range has been increased and refined to suit most process industries including Fodd and beverage, Pulp & paper, Power generation, Automotive,Water and effluent filtration etc.

Product Range
- A.B.W. & M.B.W. Strainer
- A100 Series
- GT Series
- HP/HL Series

 

A.B.W. & M.B.W. Strainer
Automatic or Manual Backwash Strainers are fabricated in carbon or stainless steel with stainless steel element and internal trim. These units are epoxy lined as standard. Elements have a gross area approx. 16 times pipe area with filtration down to 150 microns. Connection sizes available from DN50 to DN900 flanged to suit Customer requirements.
Standard Pressure ratings is 1.05 MPa.
Flow Rate to 115,000 l.p.m.

 

A100 Series
These strainers are manufactured in cast materials iron, aluminium, bronze or 316 Stainless Steel, all are fitted with stainless steel elements. Their construction enables quick access to the element by means of a single tee bolt and bridge clamp closure.
The gross element area is approx. 12 times pipe area. Connection sizes available from DN 25 mm to 65 mm screwed B.S.P. female also DN 65 & 80 flanged.
Pressure rating to 0.5 MPa.,
Flow rate to 450 l.p.m.

 

GT Series
These strainers are manufactured in carbon steel or stainless steel (304 or 316) and are fitted with stainless steel element. The element is easily accessible by removing two tee bolts and the cover.
The gross element area is approx. 12 times pipe area. Connection sizes available from DN 25 mm to 80 mm screwed B.S.P. or N.P.T. female and from DN25 to DN200 flanged to suit Customer requirements. Pressure rating to suit flange requirements, 1.05 MPa as standard. Flow rate to 4500 l.p.m.
The GT Series are also available as single lever operated duplex strainers.

 

HP/HL Series
Manufactured in carbon steel or stainless steel (304 or 316) with stainless steel elements, these strainers are available with offset connections (HP Model) or inline connections (HL Model). Two standard closures are available, swing bolt type (Series 250) and stud bolt type (series 350).
The gross element area is approx. 20 times pipe area. Connection sizes available from DN 25 mm to DN600 flanged to suit customer requirements.
Standard Pressure ratings are 1.05 MPa for Series 250 units and 1.96 MPa for Series 350 units.  

More Detail

Translate